The system consists of 4 interconnected gloveboxes; GB_EVAP#1_CHAR suits characterization purposes under inert atmosphere, the remaining 3 gloveboxes — GB_EVAP#2_TPL, GB_EVAP#3_PERO, GB_EVAP#4_M+O, each of them containing one evaporation chamber, provide the necessary processes for producing perovskite thin film solar cells under inert conditions. Reference processes/parameters are listed in the table below. The transfer of the cells between all locations of the system must be guaranteed without leaving the inert atmosphere. The glovebox-line has to fit into a laboratory with the size shown in the floor plan. Escape ways must be maintained according to ‘Technische Regeln für Arbeitsstätten Fluchtwege und Notausgänge, Flucht- und Rettungsplan’ — ASR A2.3 for up to 5 people. All evaporation chambers must be capable of co-deposition involving all installed sources. The standard substrate dimension for all processes is 156 x 156 mm and 3 mm max thickness. Mounting plates for an ALD device on GB_EVAP#4_M+O and for feedthroughs for characterization on GB_EVAP#1_CHAR have to be installed. The whole glovebox-line can share one atmosphere, so one single O2/H20 filtersystem is sufficient, provided it is powerful enough to maintain low O2 and H20 levels in all 4 gloveboxes. For controlling the co-deposition processes in all chambers, a detailed software-specification is provided as part of the tender document. The quote has to refer explicitly to every single specification listed in this document.
Deadline
Die Frist für den Eingang der Angebote war 2019-10-14.
Die Ausschreibung wurde veröffentlicht am 2019-09-12.
Anbieter
Die folgenden Lieferanten werden in Vergabeentscheidungen oder anderen Beschaffungsunterlagen erwähnt:
Objekt Umfang der Beschaffung
Titel: Glovebox Integrated Evaporation Line
E_035_339536 ChrPat-golame
Produkte/Dienstleistungen: Diverse Maschinen und Geräte für besondere Zwecke📦
Kurze Beschreibung:
“The system consists of 4 interconnected gloveboxes; GB_EVAP#1_CHAR suits characterization purposes under inert atmosphere, the remaining 3 gloveboxes —...”
Kurze Beschreibung
The system consists of 4 interconnected gloveboxes; GB_EVAP#1_CHAR suits characterization purposes under inert atmosphere, the remaining 3 gloveboxes — GB_EVAP#2_TPL, GB_EVAP#3_PERO, GB_EVAP#4_M+O, each of them containing one evaporation chamber, provide the necessary processes for producing perovskite thin film solar cells under inert conditions. Reference processes/parameters are listed in the table below. The transfer of the cells between all locations of the system must be guaranteed without leaving the inert atmosphere. The glovebox-line has to fit into a laboratory with the size shown in the floor plan. Escape ways must be maintained according to ‘Technische Regeln für Arbeitsstätten Fluchtwege und Notausgänge, Flucht- und Rettungsplan’ — ASR A2.3 for up to 5 people. All evaporation chambers must be capable of co-deposition involving all installed sources. The standard substrate dimension for all processes is 156 x 156 mm and 3 mm max thickness. Mounting plates for an ALD device on GB_EVAP#4_M+O and for feedthroughs for characterization on GB_EVAP#1_CHAR have to be installed. The whole glovebox-line can share one atmosphere, so one single O2/H20 filtersystem is sufficient, provided it is powerful enough to maintain low O2 and H20 levels in all 4 gloveboxes. For controlling the co-deposition processes in all chambers, a detailed software-specification is provided as part of the tender document. The quote has to refer explicitly to every single specification listed in this document.
1️⃣
Ort der Leistung: Freiburg🏙️
Hauptstandort oder Erfüllungsort: 79110 Freiburg
Beschreibung der Beschaffung:
“The system consists of 4 interconnected gloveboxes; GB_EVAP#1_CHAR suits characterization purposes under inert atmosphere, the remaining 3 gloveboxes —...”
Beschreibung der Beschaffung
The system consists of 4 interconnected gloveboxes; GB_EVAP#1_CHAR suits characterization purposes under inert atmosphere, the remaining 3 gloveboxes — GB_EVAP#2_TPL, GB_EVAP#3_PERO, GB_EVAP#4_M+O, each of them containing one evaporation chamber, provide the necessary processes for producing perovskite thin film solar cells under inert conditions. Reference processes/parameters are listed in the table below. The transfer of the cells between all locations of the system must be guaranteed without leaving the inert atmosphere. The glovebox-line has to fit into a laboratory with the size shown in the floor plan. Escape ways must be maintained according to ‘Technische Regeln für Arbeitsstätten Fluchtwege und Notausgänge, Flucht- und Rettungsplan’ — ASR A2.3 for up to 5 people. All evaporation chambers must be capable of co-deposition involving all installed sources. The standard substrate dimension for all processes is 156 x 156 mm and 3 mm max thickness. Mounting plates for an ALD device on GB_EVAP#4_M+O and for feedthroughs for characterization on GB_EVAP#1_CHAR have to be installed. The whole glovebox-line can share one atmosphere, so one single O2/H20 filtersystem is sufficient, provided it is powerful enough to maintain low O2 and H20 levels in all 4 gloveboxes. For controlling the co-deposition processes in all chambers, a detailed software-specification is provided as part of the tender document. The quote has to refer explicitly to every single specification listed in this document.
Mehr anzeigen Vergabekriterien
Der Preis ist nicht das einzige Zuschlagskriterium, und alle Kriterien werden nur in den Auftragsunterlagen genannt
Laufzeit des Vertrags, der Rahmenvereinbarung oder des dynamischen Beschaffungssystems
Der nachstehende Zeitrahmen ist in Monaten ausgedrückt.
Beschreibung
Dauer: 8
Informationen über die Begrenzung der Zahl der einzuladenden Bewerber
Vorgesehene Mindestanzahl: 3
Maximale Anzahl: 5
Informationen über Optionen
Optionen ✅
Beschreibung der Optionen:
“— service contract for glovebox system,
— service contract for evaporation systems,
— dual sensors for redundant thickness control,
— precision scale,
—...”
Beschreibung der Optionen
— service contract for glovebox system,
— service contract for evaporation systems,
— dual sensors for redundant thickness control,
— precision scale,
— offers and typical operating times should be submitted for all major wear/spare parts, e.g. gloves, scroll pump, which must be replaced regularly during normal use.
Rechtliche, wirtschaftliche, finanzielle und technische Informationen Bedingungen für die Teilnahme
Liste und kurze Beschreibung der Bedingungen:
“The documents listed below must be presented in full with the offer. Incomplete documents may lead to the exclusion of the proceedings.” Wirtschaftliche und finanzielle Leistungsfähigkeit
Liste und kurze Beschreibung der Auswahlkriterien:
“1) Company profile and the actual amount of employees;
2) Designation of the company revenue for the last 3 business year;
3) Self-declaration regarding the...”
Liste und kurze Beschreibung der Auswahlkriterien
1) Company profile and the actual amount of employees;
2) Designation of the company revenue for the last 3 business year;
3) Self-declaration regarding the lack of exclusion criteria pursuant to § 123 and § 124 of the German Act Against Restraints of Competition (GWB);
4) Excerpt from the Central Trade Register according to § 150a GewO (is requested by the client).
Mehr anzeigen Technische und berufliche Fähigkeiten
Liste und kurze Beschreibung der Auswahlkriterien:
“(1) Complete references (including contact persons with contact data) from comparable projects, which were realized in the last 3 years.” Bedingungen für den Vertrag
Bedingungen für die Vertragserfüllung:
“In the event that subcontractors are used, they must be named and their suitability is likewise to be substantiated on the basis of the listed documents...”
Bedingungen für die Vertragserfüllung
In the event that subcontractors are used, they must be named and their suitability is likewise to be substantiated on the basis of the listed documents under III.1). Furthermore, it must be confirmed that they will be available if the order is placed; their share in the scope of the contractual object must be stated.
Verfahren Art des Verfahrens
Wettbewerbliches Verfahren mit Verhandlung
Administrative Informationen
Frist für den Eingang von Angeboten oder Teilnahmeanträgen: 2019-10-14
23:59 📅
Sprachen, in denen Angebote oder Teilnahmeanträge eingereicht werden können: Deutsch 🗣️
Sprachen, in denen Angebote oder Teilnahmeanträge eingereicht werden können: Englisch 🗣️
“Request of documents — available at: The award documents can be retrieved
Exclusively through the award portal of the German e-Vergabe at...”
Request of documents — available at: The award documents can be retrieved
Exclusively through the award portal of the German e-Vergabe at www.deutsche-evergabe.de with the tender submission, contenders are also subject to the provisions regarding unsuccessful tenders (§134 GWB [German Act Against Restraints of Competition]). Questions or remarks from the tenderer must be sent, in English only, exclusively via e-mail to the contact point named under No I.1. As far as relevant, responses to the questions or remarks of the tenderer shall also be sent to all other tenderers.
Pursuant to Section 9 Par. 3 S. 2 VgV (German public procurement regulation), the contract notice and the award documents are available to you at the German eVergabe with or without registration.
Please note that registration is required for requests to participate, tender submissions and tenderer questions.
We therefore recommend early registration, also in order to receive any tenderer information; you otherwise bear the risk of possible tender exclusion.
Mehr anzeigen Körper überprüfen
Name: Vergabekammer des Bundes beim Bundeskartellamt
Postanschrift: Villemombler Straße 76
Postort: Bonn
Postleitzahl: 53123
Land: Deutschland 🇩🇪 Verfahren zur Überprüfung
Genaue Informationen über Fristen für Überprüfungsverfahren:
“A request for review is inadmissible if more than 15 calendar days have passed since the receipt of the notification from the ordering party indicating a...”
Genaue Informationen über Fristen für Überprüfungsverfahren
A request for review is inadmissible if more than 15 calendar days have passed since the receipt of the notification from the ordering party indicating a lack of willingness to help with the objection (§ 160 Par. 3 Clause 1 No 4 GWB ). A request for review is additionally inadmissible if the contract has been awarded before the Vergabekammer ‘Procurement Review Authority’ has informed the ordering party of the request for review (§§ 168 Par. 2 Clause 1, 169 Par. 1 GWB). The award of the contract is possible 15 calendar days after the dispatch of the tenderer information pursuant to § 134 Par. 1 GWB. If the information is sent electronically or via fax, this time period is reduced to ten calendar days (§ 134 Par. 2 GWB). The time period begins on the day after the dispatch of the information by the ordering party; the day on which it is received at the concerned tenderer and applicant is not relevant. The admissibility of a request for review furthermore presupposes that a complaint has been made to the ordering party with regard to the asserted procurement violations within 10 days after knowledge was obtained of it (§ 160 Par. 3 Clause 1 No 1 GWB). Complaints regarding violations of procurement rules that are apparent on the basis of the announcement must be made to the ordering party before the expiration of the time period named in the announcement for the application or for the tendering (§ 160 Par. 3 Clause 1 No 1 GWB). Complaints regarding violations of procurement rules that do not become apparent until appearing in the award documents must be made to the ordering party no later than by the expiration of the time period for the application or for the tendering (§ 160 Par. 3 Clause 1 No 1 GWB).
Mehr anzeigen Dienststelle, bei der Informationen über das Überprüfungsverfahren eingeholt werden können
Name:
“Fraunhofer Gesellschaft zur Förderung der angewandten Forschung e.V. über Vergabeportal eVergabe”
Postanschrift: Hansastraße 27c
Postort: München
Postleitzahl: 80686
Land: Deutschland 🇩🇪
E-Mail: einkauf@zv.fraunhofer.de📧
URL: http://www.fraunhofer.de🌏
Quelle: OJS 2019/S 179-435276 (2019-09-12)
Ergänzende Angaben (2019-10-10) Objekt Umfang der Beschaffung
Kurze Beschreibung:
“The system consists of 4 interconnected gloveboxes; GB_EVAP#1_CHAR suits characterization purposes under inert atmosphere, the remaining 3 gloveboxes —...”
Kurze Beschreibung
The system consists of 4 interconnected gloveboxes; GB_EVAP#1_CHAR suits characterization purposes under inert atmosphere, the remaining 3 gloveboxes — GB_EVAP#2_TPL, GB_EVAP#3_PERO, GB_EVAP#4_M+O, each of them containing one evaporation chamber, provide the necessary processes for producing perovskite thin film solar cells under inert conditions. Reference processes/parameters are listed in the table below. The transfer of the cells between all locations of the system must be guaranteed without leaving the inert atmosphere. The glovebox-line has to fit into a laboratory with the size shown in the floor plan. Escape ways must be maintained according to ‘Technische Regeln für Arbeitsstätten Fluchtwege und Notausgänge, Flucht- und Rettungsplan’ — ASR A2.3 for up to 5 people. All evaporation chambers must be capable of co-deposition involving all installed sources. The standard substrate dimension for all processes is 156 x 156 mm and 3 mm max thickness. Mounting plates for an ALD device o
Ergänzende Informationen Referenz der ursprünglichen Mitteilung
Nummer der Bekanntmachung im Amtsblatt S: 2019/S 179-435276
Änderungen Zu berichtigender Text in der ursprünglichen Bekanntmachung
Nummer des Abschnitts: IV.2.2)
Ort des zu ändernden Textes: Time limit for receipt of tenders or requests to participate
Alter Wert
Datum: 2019-10-14 📅
Neuer Wert
Datum: 2019-10-20 📅
Quelle: OJS 2019/S 199-483478 (2019-10-10)
Bekanntmachung über vergebene Aufträge (2020-10-28) Öffentlicher Auftraggeber Art des öffentlichen Auftraggebers
Andere Art: Research Company e. V.
Objekt Umfang der Beschaffung
Kurze Beschreibung:
“The system consists of four interconnected gloveboxes: GB_EVAP#1_CHAR suits characterisation purposes under inert atmosphere; the remaining three...”
Kurze Beschreibung
The system consists of four interconnected gloveboxes: GB_EVAP#1_CHAR suits characterisation purposes under inert atmosphere; the remaining three gloveboxes: GB_EVAP#2_TPL, GB_EVAP#3_PERO, GB_EVAP#4_M+O; each of them containing one evaporation chamber; provide the necessary processes for producing perovskite thin film solar cells under inert conditions. Reference processes/parameters are listed in the table below. The transfer of the cells between all locations of the system must be guaranteed without leaving the inert atmosphere. The glovebox-line has to fit into a laboratory with the size shown in the floor plan. Escape ways must be maintained according to ‘Technische Regeln für Arbeitsstätten Fluchtwege und Notausgänge, Flucht- und Rettungsplan’ — ASR A2.3 for up to five people. All evaporation chambers must be capable of co-deposition involving all installed sources. The standard substrate dimension for all processes is 156 x 156 mm and 3 mm max thickness. Mounting plates for an ALD device o
Mehr anzeigen
Gesamtwert der Beschaffung (ohne MwSt.): EUR 0.01 💰
Beschreibung
Hauptstandort oder Erfüllungsort: 79110 Freiburg.
Beschreibung der Beschaffung:
“The system consists of four interconnected gloveboxes: GB_EVAP#1_CHAR suits characterisation purposes under inert atmosphere; the remaining three...”
Beschreibung der Beschaffung
The system consists of four interconnected gloveboxes: GB_EVAP#1_CHAR suits characterisation purposes under inert atmosphere; the remaining three gloveboxes: GB_EVAP#2_TPL, GB_EVAP#3_PERO, GB_EVAP#4_M+O; each of them containing one evaporation chamber; provide the necessary processes for producing perovskite thin film solar cells under inert conditions. Reference processes/parameters are listed in the table below. The transfer of the cells between all locations of the system must be guaranteed without leaving the inert atmosphere. The glovebox-line has to fit into a laboratory with the size shown in the floor plan. Escape ways must be maintained according to ‘Technische Regeln für Arbeitsstätten Fluchtwege und Notausgänge, Flucht- und Rettungsplan’ — ASR A2.3 for up to five people. All evaporation chambers must be capable of co-deposition involving all installed sources. The standard substrate dimension for all processes is 156 x 156 mm and 3 mm max thickness. Mounting plates for an ALD device on GB_EVAP#4_M+O and for feedthroughs for characterisation on GB_EVAP#1_CHAR have to be installed. The whole glovebox-line can share one atmosphere, so one single O2/H20 filtersystem is sufficient, provided it is powerful enough to maintain low O2 and H20 levels in all four gloveboxes. For controlling the co-deposition processes in all chambers, a detailed software-specification is provided as part of the tender document. The quote has to refer explicitly to every single specification listed in this document.
Mehr anzeigen Vergabekriterien
Qualitätskriterium (Bezeichnung):
“Technical design and suitability for the manufacture of perovskite and perovskite silicon tandem solar cells”
Qualitätskriterium (Gewichtung): 65
Preis (Gewichtung): 35
Informationen über Optionen
Beschreibung der Optionen:
“— service contract for glovebox system;
— service contract for evaporation systems;
— dual sensors for redundant thickness control;
— precision scale;
—...”
Beschreibung der Optionen
— service contract for glovebox system;
— service contract for evaporation systems;
— dual sensors for redundant thickness control;
— precision scale;
— offers and typical operating times should be submitted for all major wear/spare parts, e.g. gloves, scroll pump, which must be replaced regularly during normal use.
Verfahren Administrative Informationen
Frühere Veröffentlichungen zu diesem Verfahren: 2019/S 179-435276
Auftragsvergabe
1️⃣
Titel: Glovebox integrated Evaporation Line
Datum des Vertragsabschlusses: 2020-09-25 📅
Informationen über Ausschreibungen
Anzahl der eingegangenen Angebote: 3
Anzahl der auf elektronischem Wege eingegangenen Angebote: 3
Name und Anschrift des Auftragnehmers
Name: M. Braun Inertgas-Systeme GmbH
Postort: Garching
Land: Deutschland 🇩🇪
Region: München, Landkreis🏙️
Der Auftragnehmer ist ein KMU
Angaben zum Wert des Auftrags/der Partie (ohne MwSt.)
Gesamtwert des Auftrags/Loses: EUR 0.01 💰
“Request of documents — available at: the award documents can be retrieved.
Exclusively through the award portal of the German e-Vergabe at...”
Request of documents — available at: the award documents can be retrieved.
Exclusively through the award portal of the German e-Vergabe at www.deutsche-evergabe.de With the tender submission, contenders are also subject to the provisions regarding unsuccessful tenders (§134 GWB (German Act Against Restraints of Competition)). Questions or remarks from the tenderer must be sent, in English only, exclusively via email to the contact point named under No I.1). As far as relevant, responses to the questions or remarks of the tenderer shall also be sent to all other tenderers.
Pursuant to section 9 Par. 3 S. 2 VgV (German public procurement regulation), the contract notice and the award documents are available to you at the German eVergabe with or without registration.
Please note that registration is required for requests to participate, tender submissions and tenderer questions.
We therefore recommend early registration, also in order to receive any tenderer information; you otherwise bear the risk of possible tender exclusion.
Mehr anzeigen Verfahren zur Überprüfung
Genaue Informationen über Fristen für Überprüfungsverfahren:
“A request for review is inadmissible if more than 15 calendar days have passed since the receipt of the notification from the ordering party indicating a...”
Genaue Informationen über Fristen für Überprüfungsverfahren
A request for review is inadmissible if more than 15 calendar days have passed since the receipt of the notification from the ordering party indicating a lack of willingness to help with the objection (§ 160 Par. 3 Clause 1 No 4 GWB (German Act Against Restraints of Competition)). A request for review is additionally inadmissible if the contract has been awarded before the Vergabekammer (procurement review authority) has informed the ordering party of the request for review (§§ 168 Par. 2 Clause 1, 169 Par. 1 GWB). The award of the contract is possible 15 calendar days after the dispatch of the tenderer information pursuant to § 134 Par. 1 GWB. If the information is sent electronically or via fax, this time period is reduced to ten calendar days (§ 134 Par. 2 GWB). The time period begins on the day after the dispatch of the information by the ordering party; the day on which it is received at the concerned tenderer and applicant is not relevant. The admissibility of a request for review furthermore presupposes that a complaint has been made to the ordering party with regard to the asserted procurement violations within 10 days after knowledge was obtained of it (§ 160 Par. 3 Clause 1 No 1 GWB). Complaints regarding violations of procurement rules that are apparent on the basis of the announcement must be made to the ordering party before the expiration of the time period named in the announcement for the application or for the tendering (§ 160 Par. 3 Clause 1 No 1 GWB). Complaints regarding violations of procurement rules that do not become apparent until appearing in the award documents must be made to the ordering party no later than by the expiration of the time period for the application or for the tendering (§ 160 Par. 3 Clause 1 No 1 GWB).
Mehr anzeigen
Quelle: OJS 2020/S 213-521440 (2020-10-28)