Fraunhofer IZM is planning to purchase a 300 x 300 mm sensor-equipped mold tool for use in APIC Yamada Panel Molding Machine. System focus is the in-situ measurement of process data during encapsulation as one key process step of the fan-out panel level packaging process chain. The system should deliver accurate data from temperature-, pressure- and dielectric sensors distributed over the whole molding area. Sensor surfaces will be protected by ETFE-tape during encapsulation process. Furthermore, it is desired to acquire fiber-bragg sensors for in-situ measurement of process data.
Deadline
Die Frist für den Eingang der Angebote war 2019-08-19.
Die Ausschreibung wurde veröffentlicht am 2019-07-18.
Objekt Umfang der Beschaffung
Titel: Sensor Mold Tool
E_059_280718 ChrPat-bla FMD
Produkte/Dienstleistungen: Diverse Maschinen und Geräte für besondere Zwecke📦
Kurze Beschreibung:
“Fraunhofer IZM is planning to purchase a 300 x 300 mm sensor-equipped mold tool for use in APIC Yamada Panel Molding Machine. System focus is the in-situ...”
Kurze Beschreibung
Fraunhofer IZM is planning to purchase a 300 x 300 mm sensor-equipped mold tool for use in APIC Yamada Panel Molding Machine. System focus is the in-situ measurement of process data during encapsulation as one key process step of the fan-out panel level packaging process chain. The system should deliver accurate data from temperature-, pressure- and dielectric sensors distributed over the whole molding area. Sensor surfaces will be protected by ETFE-tape during encapsulation process. Furthermore, it is desired to acquire fiber-bragg sensors for in-situ measurement of process data.
1️⃣
Ort der Leistung: Berlin🏙️
Hauptstandort oder Erfüllungsort: 13355 Berlin.
Beschreibung der Beschaffung:
“Fraunhofer IZM is planning to purchase a 300 x 300 mm sensor-equipped mold tool for use in APIC Yamada Panel Molding Machine. System focus is the in-situ...”
Beschreibung der Beschaffung
Fraunhofer IZM is planning to purchase a 300 x 300 mm sensor-equipped mold tool for use in APIC Yamada Panel Molding Machine. System focus is the in-situ measurement of process data during encapsulation as one key process step of the fan-out panel level packaging process chain. The system should deliver accurate data from temperature-, pressure- and dielectric sensors distributed over the whole molding area. Sensor surfaces will be protected by ETFE-tape during encapsulation process. Furthermore, it is desired to acquire fiber-bragg sensors for in-situ measurement of process data.
Mehr anzeigen Vergabekriterien
Der Preis ist nicht das einzige Zuschlagskriterium, und alle Kriterien werden nur in den Auftragsunterlagen genannt
Laufzeit des Vertrags, der Rahmenvereinbarung oder des dynamischen Beschaffungssystems
Der nachstehende Zeitrahmen ist in Monaten ausgedrückt.
Beschreibung
Dauer: 4
Informationen über Optionen
Optionen ✅
Beschreibung der Optionen: Extended warranty.
Rechtliche, wirtschaftliche, finanzielle und technische Informationen Bedingungen für die Teilnahme
Liste und kurze Beschreibung der Bedingungen:
“The documents listed below must be presented in full with the offer. Incomplete documents may lead to the exclusion of the proceedings.” Wirtschaftliche und finanzielle Leistungsfähigkeit
Liste und kurze Beschreibung der Auswahlkriterien:
“1) Company profile and the actual amount of employees;
2) Designation of the company revenue for the last 3 business years;
3) Self-declaration regarding...”
Liste und kurze Beschreibung der Auswahlkriterien
1) Company profile and the actual amount of employees;
2) Designation of the company revenue for the last 3 business years;
3) Self-declaration regarding the lack of exclusion criteria pursuant to § 123 and § 124 of the German Act Against Restraints of Competition (GWB);
4) Excerpt from the central trade register according to § 150a GewO (is requested by the client).
Mehr anzeigen Technische und berufliche Fähigkeiten
Liste und kurze Beschreibung der Auswahlkriterien:
“1) At least 3 projects should be given as reference, that were conducted in the area of encapsulation of microelectronics by compression- or transfer...”
Liste und kurze Beschreibung der Auswahlkriterien
1) At least 3 projects should be given as reference, that were conducted in the area of encapsulation of microelectronics by compression- or transfer molding of reactive resins.
Mehr anzeigen Bedingungen für den Vertrag
Bedingungen für die Vertragserfüllung:
“In the event that subcontractors are used, they must be named and their suitability is likewise to be substantiated on the basis of the listed documents...”
Bedingungen für die Vertragserfüllung
In the event that subcontractors are used, they must be named and their suitability is likewise to be substantiated on the basis of the listed documents under III.1). Furthermore, it must be confirmed that they will be available if the order is placed; their share in the scope of the contractual object must be stated.
Verfahren Art des Verfahrens
Offenes Verfahren
Administrative Informationen
Frist für den Eingang von Angeboten oder Teilnahmeanträgen: 2019-08-19
23:59 📅
Sprachen, in denen Angebote oder Teilnahmeanträge eingereicht werden können: Englisch 🗣️
Das Angebot muss gültig sein bis: 2019-09-12 📅
Bedingungen für die Öffnung der Angebote: 2019-08-20
13:00 📅
“Request of documents — available at: the award documents can be retrieved exclusively through the award portal of the German e-Vergabe at...”
Request of documents — available at: the award documents can be retrieved exclusively through the award portal of the German e-Vergabe at www.deutsche-evergabe.de
With the tender submission, contenders are also subject to the provisions regarding unsuccessful tenders (§134 GWB [German Act Against Restraints of Competition]). Questions or remarks from the tenderer must be sent, in English only, exclusively via email to the contact point named under No. I.1. As far as relevant, responses to the questions or remarks of the tenderer shall also be sent to all other tenderers.
Pursuant to Section 9 Par. 3 S. 2 VgV (German public procurement regulation), the contract notice and the award documents are available to you at the German eVergabe with or without registration.
Please note that registration is required for requests to participate, tender submissions and tenderer questions.
We therefore recommend early registration, also in order to receive any tenderer information; you otherwise bear the risk of possible tender exclusion.
Mehr anzeigen Körper überprüfen
Name: Vergabekammer des Bundes beim Bundeskartellamt
Postanschrift: Villemombler Straße 76
Postort: Bonn
Postleitzahl: 53123
Land: Deutschland 🇩🇪 Verfahren zur Überprüfung
Genaue Informationen über Fristen für Überprüfungsverfahren:
“A request for review is inadmissible if more than 15 calendar days have passed since the receipt of the notification from the ordering party indicating a...”
Genaue Informationen über Fristen für Überprüfungsverfahren
A request for review is inadmissible if more than 15 calendar days have passed since the receipt of the notification from the ordering party indicating a lack of willingness to help with the objection (§ 160 Par. 3 Clause 1 No 4 GWB ). A request for review is additionally inadmissible if the contract has been awarded before the Vergabekammer has informed the ordering party of the request for review (§§ 168 Par. 2 Clause 1, 169 Par. 1 GWB). The award of the contract is possible 15 calendar days after the dispatch of the tenderer information pursuant to § 134 Par. 1 GWB. If the information is sent electronically or via fax, this time period is reduced to ten calendar days (§ 134 Par. 2 GWB). The time period begins on the day after the dispatch of the information by the ordering party; the day on which it is received at the concerned tenderer and applicant is not relevant. The admissibility of a request for review furthermore presupposes that a complaint has been made to the ordering party with regard to the asserted procurement violations within 10 days after knowledge was obtained of it(§ 160 Par. 3 Clause 1 No 1 GWB). Complaints regarding violations of procurement rules that are apparent on the basis of the announcement must be made to the ordering party before the expiration of the time period named in the announcement for the application or for the tendering (§ 160 Par. 3 Clause 1 No 1 GWB). Complaints regarding violations of procurement rules that do not become apparent until appearing in the award documents must be made to the ordering party no later than by the expiration of the time period for the application or for the tendering (§ 160 Par. 3 Clause 1 No 1 GWB).
Mehr anzeigen Dienststelle, bei der Informationen über das Überprüfungsverfahren eingeholt werden können
Name:
“Fraunhofer Gesellschaft zur Förderung der angewandten Forschung e.V. über Vergabeportal eVergabe”
Postanschrift: Hansastraße 27c
Postort: München
Postleitzahl: 80686
Land: Deutschland 🇩🇪
E-Mail: einkauf@zv.fraunhofer.de📧
URL: http://www.fraunhofer.de🌏
Quelle: OJS 2019/S 140-344100 (2019-07-18)
Bekanntmachung über vergebene Aufträge (2019-08-22) Objekt Umfang der Beschaffung
Kurze Beschreibung:
“Fraunhofer IZM is planning to purchase a 300x300 mm2 sensor-equipped mold tool for use in APIC Yamada Panel Molding Machine. System focus is the in-situ...”
Kurze Beschreibung
Fraunhofer IZM is planning to purchase a 300x300 mm2 sensor-equipped mold tool for use in APIC Yamada Panel Molding Machine. System focus is the in-situ measurement of process data during encapsulation as one key process step of the Fan-out Panel Level Packaging process chain. The system should deliver accurate data from temperature-, pressure- and dielectric sensors distributed over the whole molding area. Sensor surfaces will be protected by ETFE-tape during encapsulation process. Furthermore, it is desired to acquire fiber-bragg sensors for in-situ measurement of process data.
Mehr anzeigen Beschreibung
Hauptstandort oder Erfüllungsort: 13355 Berlin
Beschreibung der Beschaffung:
“Fraunhofer IZM is planning to purchase a 300x300 mm sensor-equipped mold tool for use in APIC Yamada Panel Molding Machine. System focus is the in-situ...”
Beschreibung der Beschaffung
Fraunhofer IZM is planning to purchase a 300x300 mm sensor-equipped mold tool for use in APIC Yamada Panel Molding Machine. System focus is the in-situ measurement of process data during encapsulation as one key process step of the fan-out panel level packaging process chain. The system should deliver accurate data from temperature-, pressure- and dielectric sensors distributed over the whole molding area. Sensor surfaces will be protected by ETFE-tape during encapsulation process. Furthermore, it is desired to acquire fiber-bragg sensors for in-situ measurement of process data.
Mehr anzeigen Vergabekriterien
Qualitätskriterium (Bezeichnung): Technical realisation
Qualitätskriterium (Gewichtung): 65 %
Preis (Gewichtung): 35 %
Informationen über Optionen
Beschreibung der Optionen: Extended warranty
Beschreibung
Zusätzliche Informationen: Cancellation of the public tender in according to §63 (1) 1 VGV
Verfahren Administrative Informationen
Frühere Veröffentlichungen zu diesem Verfahren: 2019/S 140-344100
Auftragsvergabe
1️⃣
Titel: Sensor Mold Tool
Informationen über nicht gewährte Zuschüsse
Es sind keine Angebote oder Teilnahmeanträge eingegangen oder alle wurden abgelehnt
“— Request of documents — available at: the award documents can be retrieved
Exclusively through the award portal of the German e-Vergabe at...”
— Request of documents — available at: the award documents can be retrieved
Exclusively through the award portal of the German e-Vergabe at www.deutsche-evergabe.de
With the tender submission, contenders are also subject to the provisions regarding unsuccessful tenders (§134 GWB [German Act Against Restraints of Competition]). Questions or remarks from the tenderer must be sent, in English only, exclusively via e-mail to the contact point named under No I.1. As far as relevant, responses to the questions or remarks of the tenderer shall also be sent to all other tenderers.
Pursuant to Section 9 Par. 3 S. 2 VgV (German public procurement regulation), the contract notice and the award documents are available to you at the German eVergabe with or without registration.
Please note that registration is required for requests to participate, tender submissions and tenderer questions.
We therefore recommend early registration, also in order to receive any tenderer information; you otherwise bear the risk of possible tender exclusion.
Mehr anzeigen Verfahren zur Überprüfung
Genaue Informationen über Fristen für Überprüfungsverfahren:
“A request for review is inadmissible if more than 15 calendar days have passed since the receipt of the notification from the ordering party indicating a...”
Genaue Informationen über Fristen für Überprüfungsverfahren
A request for review is inadmissible if more than 15 calendar days have passed since the receipt of the notification from the ordering party indicating a lack of willingness to help with the objection (§ 160 Par. 3 Clause 1 No 4 GWB ‘German Act Against Restraints of Competition’). A request for review is additionally inadmissible if the contract has been awarded before the Vergabekammer ‘procurement review authority’ has informed the ordering party of the request for review (§§ 168 Par. 2 Clause 1, 169 Par. 1 GWB). The award of the contract is possible 15 calendar days after the dispatch of the tenderer information pursuant to § 134 Par. 1 GWB. If the information is sent electronically or via fax, this time period is reduced to ten calendar days (§ 134 Par. 2 GWB). The time period begins on the day after the dispatch of the information by the ordering party; the day on which it is received at the concerned tenderer and applicant is not relevant. The admissibility of a request for review furthermore presupposes that a complaint has been made to the ordering party with regard to the asserted procurement violations within 10 days after knowledge was obtained of it (§ 160 Par. 3 Clause 1 No 1 GWB). Complaints regarding violations of procurement rules that are apparent on the basis of the announcement must be made to the ordering party before the expiration of the time period named in the announcement for the application or for the tendering (§ 160 Par. 3 Clause 1 No 1 GWB). Complaints regarding violations of procurement rules that do not become apparent until appearing in the award documents must be made to the ordering party no later than by the expiration of the time period for the application or for the tendering (§ 160 Par. 3 Clause 1 No. 1 GWB).
Mehr anzeigen
Quelle: OJS 2019/S 164-402416 (2019-08-22)