The purpose of this tender is the procurement of a standalone, free-standing magnetron sputter system for polycrystalline and epitaxial magnetic thin-film materials. Key specifications of the to-be-delivered system include: Ten 2” magnetron sputter guns (7 confocal guns + 1 direct gun + 2 off-axis guns); all guns must be able to accommodate up to 0.125” thick pure iron targets; all guns must have a modular magnet design to allow balanced, unbalanced, and magnetic material configurations; must allow baking up to 200C without disassembly; DC (750 W) and RF (300 W) power supplies that can sustain stable plasma at 1 W / 2 mTorr (DC) and at 3 W / 3 mTorr (RF); wedge shutter; 75 mm diameter substrate holder that allows rotating as well as stationary deposition at up to 850C with temperature uniformity of < ± 1.5 % over 2” area; possibility of O2 and N2 atmosphere, even at maximum substrate temperature; combined turbo and cryo pumping; permanently installed bakeout jacket system; fully automatic multilayer deposition and offline preparation of recipes; proven CE compliance; must have service center in Europe for all repairs. We accept only bidders who can prove an extensive, satisfied base of customers who have used the offered or very similar system manufactured by the bidder for > 5 years in spintronics and complex oxide materials research.
Deadline
Die Frist für den Eingang der Angebote war 2020-08-20.
Die Ausschreibung wurde veröffentlicht am 2020-08-06.
Objekt Umfang der Beschaffung
Titel: A847 Sputtersystem
Produkte/Dienstleistungen: Instrumente zum Prüfen von physikalischen Eigenschaften📦
Kurze Beschreibung:
“The purpose of this tender is the procurement of a standalone, free-standing magnetron sputter system for polycrystalline and epitaxial magnetic thin-film...”
Kurze Beschreibung
The purpose of this tender is the procurement of a standalone, free-standing magnetron sputter system for polycrystalline and epitaxial magnetic thin-film materials. Key specifications of the to-be-delivered system include: Ten 2” magnetron sputter guns (7 confocal guns + 1 direct gun + 2 off-axis guns); all guns must be able to accommodate up to 0.125” thick pure iron targets; all guns must have a modular magnet design to allow balanced, unbalanced, and magnetic material configurations; must allow baking up to 200C without disassembly; DC (750 W) and RF (300 W) power supplies that can sustain stable plasma at 1 W / 2 mTorr (DC) and at 3 W / 3 mTorr (RF); wedge shutter; 75 mm diameter substrate holder that allows rotating as well as stationary deposition at up to 850C with temperature uniformity of < ± 1.5 % over 2” area; possibility of O2 and N2 atmosphere, even at maximum substrate temperature; combined turbo and cryo pumping; permanently installed bakeout jacket system; fully automatic multilayer deposition and offline preparation of recipes; proven CE compliance; must have service center in Europe for all repairs. We accept only bidders who can prove an extensive, satisfied base of customers who have used the offered or very similar system manufactured by the bidder for > 5 years in spintronics and complex oxide materials research.
1️⃣
Ort der Leistung: Deutschland🏙️
Ort der Leistung: Berlin🏙️
Hauptstandort oder Erfüllungsort: Laboratory Hahn-Meitner Platz 1 14109 Berlin
Beschreibung der Beschaffung:
“The purpose of this tender is the procurement of a standalone, free-standing magnetron sputter system for polycrystalline and epitaxial magnetic thin-film...”
Beschreibung der Beschaffung
The purpose of this tender is the procurement of a standalone, free-standing magnetron sputter system for polycrystalline and epitaxial magnetic thin-film materials. Key specifications of the to-be-delivered system include: Ten 2” magnetron sputter guns (7 confocal guns + 1 direct gun + 2 off-axis guns); all guns must be able to accommodate up to 0.125” thick pure iron targets; all guns must have a modular magnet design to allow balanced, unbalanced, and magnetic material configurations; must allow baking up to 200C without disassembly; DC (750 W) and RF (300 W) power supplies that can sustain stable plasma at 1 W / 2 mTorr (DC) and at 3 W / 3 mTorr (RF); wedge shutter; 75 mm diameter substrate holder that allows rotating as well as stationary deposition at up to 850C with temperature uniformity of < ± 1.5 % over 2” area; possibility of O2 and N2 atmosphere, even at maximum substrate temperature; combined turbo and cryo pumping; permanently installed bakeout jacket system; fully automatic multilayer deposition and offline preparation of recipes; proven CE compliance; must have service center in Europe for all repairs. We accept only bidders who can prove an extensive, satisfied base of customers who have used the offered or very similar system manufactured by the bidder for > 5 years in spintronics and complex oxide materials research.
Mehr anzeigen Vergabekriterien
Qualitätskriterium (Bezeichnung): quality
Qualitätskriterium (Gewichtung): 50 %
Qualitätskriterium (Bezeichnung): delivery time
Qualitätskriterium (Gewichtung): 10 %
Qualitätskriterium (Bezeichnung): service
Preis (Gewichtung): 30 %
Laufzeit des Vertrags, der Rahmenvereinbarung oder des dynamischen Beschaffungssystems
Der nachstehende Zeitrahmen ist in Monaten ausgedrückt.
Beschreibung
Dauer: 6
Informationen über die Begrenzung der Zahl der einzuladenden Bewerber
Voraussichtliche Anzahl von Bewerbern: 3
Objektive Kriterien für die Auswahl der begrenzten Anzahl von Bewerbern:
“.Fulfillment of the specified suitability criteria for economic and professional suitability”
Rechtliche, wirtschaftliche, finanzielle und technische Informationen Wirtschaftliche und finanzielle Leistungsfähigkeit
Liste und kurze Beschreibung der Auswahlkriterien:
“— brief presentation of the company,
— signed declaration of compliance with the requested technical and commercial skills,
— declaration of the total gross...”
Liste und kurze Beschreibung der Auswahlkriterien
— brief presentation of the company,
— signed declaration of compliance with the requested technical and commercial skills,
— declaration of the total gross revenue of the company in the last three years, plus the revenue specifically related to services in this tender.
“Minimum revenue: twice the tender value in average in the last three fiscal years.” Technische und berufliche Fähigkeiten
Liste und kurze Beschreibung der Auswahlkriterien:
“— References:
The bidder must provide references of customers who fulfill the following requirements:
(3 references required) Routinely uses the offered or...”
Liste und kurze Beschreibung der Auswahlkriterien
— References:
The bidder must provide references of customers who fulfill the following requirements:
(3 references required) Routinely uses the offered or similar system for applications in spintronics for more than five years for at least two of the following material classes o Perpendicular magnetic Co-based films for magnetic skyrmions. Research studies must show:
(i) the existence of skyrmions and
(ii) the displacement of skyrmions by current or light in the material grown in the system of the bidder.
— Synthetic antiferromagnets with perpendicular magnetic anisotropy o Epitaxial Mn-based antiferromagnets (2 references required) Successfully uses the offered or similar system for off-axis sputter deposition of single crystalline complex oxides such as BaTiO3, SrTiO3, BiFeO3, La0.7Sr0.3MnO3, or Tm3Fe5O12.
For each reference, one of the attached forms must be provided. Each form must include sufficient information to evaluate how the reference meets the above requested criteria plus contact information of the reference.
— Information on backing plate design for oxide targets, to ensure good cooling and target stability.
— Letter from RHEED manufacturer confirming successful integration of their product into similar equipment.
— Video of load-lock system showing actuation of transfer system • Pictures and information on off axis sputtering gun design, and optimal positioning for maximum deposition rate / minimal charge particle bombardment.
— Manufacturing information on caster rating.
Mehr anzeigen Bedingungen für die Teilnahme
Bedingungen für die Teilnahme (technische und berufliche Fähigkeiten):
“(3 references required) Routinely uses the offered or similar system for applications in spintronics for more than five years for at least two of the...”
Bedingungen für die Teilnahme (technische und berufliche Fähigkeiten)
(3 references required) Routinely uses the offered or similar system for applications in spintronics for more than five years for at least two of the following material classes (2 references required) Successfully uses the offered or similar system for off-axis sputter deposition of single crystalline complex oxides such as BaTiO3, SrTiO3, BiFeO3, La0.7Sr0.3MnO3, or Tm3Fe5O12.
Verfahren Art des Verfahrens
Wettbewerbliches Verfahren mit Verhandlung
Beschleunigtes Verfahren: Maßnahme zur Beschleunigung investiver Maßnahmen wegen der COVID-19-Pandemie
Informationen über die Reduzierung der Anzahl von Lösungen oder Angeboten während der Verhandlungen oder des Dialogs
Rückgriff auf ein gestaffeltes Verfahren, um die Zahl der zu erörternden Lösungen oder zu verhandelnden Angebote schrittweise zu verringern
Informationen zur Verhandlung
Der Auftraggeber behält sich das Recht vor, den Auftrag auf der Grundlage der ersten Angebote zu vergeben, ohne Verhandlungen zu führen
Administrative Informationen
Frist für den Eingang von Angeboten oder Teilnahmeanträgen: 2020-08-20
23:45 📅
Voraussichtliches Datum der Versendung der Aufforderungen zur Angebotsabgabe oder zur Teilnahme an die ausgewählten Bewerber: 2020-08-28 📅
Sprachen, in denen Angebote oder Teilnahmeanträge eingereicht werden können: Englisch 🗣️
Sprachen, in denen Angebote oder Teilnahmeanträge eingereicht werden können: Deutsch 🗣️
Das Angebot muss gültig sein bis: 2020-12-31 📅
Ergänzende Informationen Informationen über elektronische Arbeitsabläufe
Die elektronische Bestellung wird verwendet
Die elektronische Rechnungsstellung wird akzeptiert
Elektronische Zahlung wird verwendet
Zusätzliche Informationen
“Please register for participation in the electronic tender free of charge at http://www.subreport.de/ and download the documents for the participation...”
Please register for participation in the electronic tender free of charge at http://www.subreport.de/ and download the documents for the participation competition under the number E99122633.
Your registration ensures that you automatically receive all the information relevant to the competition and the tender, such as answers to bidder questions and changes to the deadlines and contract documents, to the email address entered there.
If you are ready to take part in the tender, we kindly ask you to submit your application in electronic form.
Please send comments or technical questions exclusively via the procurement platform under menu item "Messages (bidder communication)" in Subreport Elvis. After evaluating the participation requests and presenting them, all participants who have demonstrated their ability to perform will receive a request to submit an offer and the necessary procurement documents and the Specification.
Mehr anzeigen Körper überprüfen
Name: Vergabekammer des Bundes beim Bundeskartellamt
Postanschrift: Villemombler Straße 76
Postort: Bonn
Land: Deutschland 🇩🇪 Für Mediationsverfahren zuständige Stelle
Name: Vergabekammer des Bundes beim Bundeskartellamt
Postanschrift: Villemombler Straße 76
Postort: Bonn
Land: Deutschland 🇩🇪 Verfahren zur Überprüfung
Genaue Informationen über Fristen für Überprüfungsverfahren:
“Violations of procurement regulations must be reported to the client within 10 calendar days, in the case of violations resulting from the announcement or...”
Genaue Informationen über Fristen für Überprüfungsverfahren
Violations of procurement regulations must be reported to the client within 10 calendar days, in the case of violations resulting from the announcement or the tender documents, by the end of the offer period at the latest. If the client informs that the complaint will not be remedied, an application for review can be submitted to the responsible procurement chamber within 15 calendar days. (§160GWB)
Mehr anzeigen Dienststelle, bei der Informationen über das Überprüfungsverfahren eingeholt werden können
Name: Vergabekammer des Bundes beim Bundeskartellamt
Postanschrift: Villemombler Straße 76
Postort: Bonn
Land: Deutschland 🇩🇪
Quelle: OJS 2020/S 154-376581 (2020-08-06)