E-BEAM Lithografietool

Kurze Beschreibung

General information
- The offer must be accompanied by a description of the machine with the principle of operation. Preferably a corresponding presentation.
- In addition, the costs for two years of maintenance are to be calculated and stated separately.
- The offer must be accompanied by a technical description of the machine with the principle of operation. Preferably a corresponding presentation.
- The costs for three years of maintenance are to be calculated and stated separately. The five spare parts with the highest costs within this period are to be named.

Liste und kurze Beschreibung der Auswahlkriterien

Technische und berufliche Leistungsfähigkeit: Referenzen:
Es werden vergleichbare auftragsbezogene Firmenreferenzen in Bezug zur ausgeschriebenen Leistung erwartet. Vergleichbar heißt
Referenzen in Zusammenarbeit mit dem Auftrag.

Die Referenzen sind als Art Referenzbescheinigung durch den Bieter mit den folgenden Angaben mit der Angebotsabgabe einzureichen:
-Referenzgeber:
-Ansprechpartner des Referenzgebers inklusive Telefonnummer:
-Zeitraum Beginn/Ende der Ausführung:
-Kurzbeschreibung des Auftragsumfangs

Zusätzliche Informationen

Bekanntmachungs-ID: CXSTYYDYTH793ELJ


Project "APECS pilot line"
Equipment procurement
Special conditions for the tender

Checks, Audits, and Investigations:
The equipment is procured as part of the EU project "APECS pilot line". The EU Commission and/or the Chips Joint Undertaking (and/or other EU bodies), which is responsible for financing and the contracting authority may carry out audits of the procurement processes. To ensure that these conditions can be met, the following rules apply to suppliers/contractors:
- The contractor must keep all original documents on a suitable medium, including digitized originals, for a period of five years from the date of payment of the final invoice, if permit-ted by national law.
- The contractor must grant the client's employees and outside personnel authorized by the contracting authority the appropriate right of access to the sites and premises where the contract is being performed and to all information, including information in electronic form, that is necessary to carry out such checks and audits. The contractor must ensure that the information is readily available at the time of the inspection or audit and will be provided in an appropriate format upon request.
- On the basis of the findings made during the audit, a provisional report is drawn up. The contracting authority or its authorised representative must send it to the contractor, who has 30 days following the date of receipt to submit observations. The contractor must re-ceive the final report within 60 days following the expiry of that deadline to submit obser-vations.

- On the basis of the final audit findings, the contracting authority may recover all or part of the payments made in accordance with the relevant procedure and may take any other measure which it considers necessary.
- In accordance with Council Regulation (Euratom, EC) No 2185/96 of 11 November 1996 con-cerning on-the-spot checks and inspection carried out by the Commission in order to pro-tect the European Communities" financial interests against fraud and other irregularities and Regulation (EU, Euratom) No 883/2013 of the European Parliament and the Council of 11 September 2013 concerning investigation conducted by the European Anti-Fraud Office , the European Anti-Fraud Office may carry out investigations, including on-the-spot checks and inspections, to establish whether there has been fraud, corruption or any other illegal activity under the contract affecting the financial interests of the Union. Findings arising from an investigation may lead to criminal prosecution under national law.
- The investigations may be carried out at any moment during the provision of the services and up to five years starting from the payment of the balance.


Terms of payment:
1. Down payment on order: 30%
2. Down payment on delivery: 40%
Final payment after acceptance: 30%

Bank guarantee:
A bank guarantee must be provided for the amount of the first instalment. The bank guarantee may only expire after acceptance.
Tool acceptance and final invoice/payment:
The service/delivery is only complete upon acceptance. If provision has been made for a trial run, acceptance shall be pronounced by a joint acceptance certificate following a fault-free test run.
The final instalment can be invoiced only after acceptance.