Superconducting dipole magnet for the Compressed Baryonic Matter (CBM) experiment at FAIR. The magnet houses the Silicon Tracking System (STS) and provides a magnetic field integral of 1 Tm which is needed to obtain a momentum resolution of ?p/p < 2% for track reconstruction at FAIR beam energies.
The magnet gap has a height of 147 cm and a width of 330 cm in order to accommodate the STS detector. The magnet is of the H-type with a warm iron yoke/pole and cylindrical superconducting coils in two separate casings like the SAMURAI magnet at RIKEN. The potted coil uses Nb-Ti wire with a large Cu/SC
ratio. The coil case made of stainless steel contains liquid helium for cooling. The vertical force in the coils is about 300 tons. The cold mass is suspended from the room-temperature vacuum vessel by suspension links. Cylindrical support struts compensate for the vertical forces. The energy stored in the magnet is about 5 MJ. The magnet will be self-protecting. However, in order to limit the temperature rise to 120 K in case of a quench, the energy will be dumped in an external resistor.
Deadline
Die Frist für den Eingang der Angebote war 2023-02-22.
Die Ausschreibung wurde veröffentlicht am 2023-01-20.
Objekt Umfang der Beschaffung
Titel: CBM Dipole Magnet
27/2600003665FAIR
Produkte/Dienstleistungen: Magnete📦
Kurze Beschreibung:
“Superconducting dipole magnet for the Compressed Baryonic Matter (CBM) experiment at FAIR. The magnet houses the Silicon Tracking System (STS) and provides...”
Kurze Beschreibung
Superconducting dipole magnet for the Compressed Baryonic Matter (CBM) experiment at FAIR. The magnet houses the Silicon Tracking System (STS) and provides a magnetic field integral of 1 Tm which is needed to obtain a momentum resolution of ?p/p < 2% for track reconstruction at FAIR beam energies.
The magnet gap has a height of 147 cm and a width of 330 cm in order to accommodate the STS detector. The magnet is of the H-type with a warm iron yoke/pole and cylindrical superconducting coils in two separate casings like the SAMURAI magnet at RIKEN. The potted coil uses Nb-Ti wire with a large Cu/SC
ratio. The coil case made of stainless steel contains liquid helium for cooling. The vertical force in the coils is about 300 tons. The cold mass is suspended from the room-temperature vacuum vessel by suspension links. Cylindrical support struts compensate for the vertical forces. The energy stored in the magnet is about 5 MJ. The magnet will be self-protecting. However, in order to limit the temperature rise to 120 K in case of a quench, the energy will be dumped in an external resistor.
1️⃣
Ort der Leistung: Darmstadt, Kreisfreie Stadt🏙️
Hauptstandort oder Erfüllungsort:
“FAIR - Facility for Antiproton and Ion Research in Europe GmbH Planckstr. 1 64291 Darmstadt”
Beschreibung der Beschaffung:
“Engineering Design of the magnet and its cryostat incl. all tools, support stands and lifting units. Engineering design of the branch box, CBM feed box and...”
Beschreibung der Beschaffung
Engineering Design of the magnet and its cryostat incl. all tools, support stands and lifting units. Engineering design of the branch box, CBM feed box and cryogenic transfer line.
Production of 1:1 mockup. Production and delivery of the magnet, consisting of yoke, cold mass, cryostat and cold leads. Production of branch box incl. cryogenic transfer line and further supports.
Production of other necessary components as well as FAT testing and SAT and assembly support.
The complete scope is shown within the detailed specification.
Mehr anzeigen Vergabekriterien
Der Preis ist nicht das einzige Zuschlagskriterium, und alle Kriterien werden nur in den Auftragsunterlagen genannt
Laufzeit des Vertrags, der Rahmenvereinbarung oder des dynamischen Beschaffungssystems
Der nachstehende Zeitrahmen ist in Monaten ausgedrückt.
Beschreibung
Dauer: 28
Rechtliche, wirtschaftliche, finanzielle und technische Informationen Bedingungen für die Teilnahme
Liste und kurze Beschreibung der Bedingungen:
“Supporting documents:
- 4. Self-declaration of suitability pursuant to Sections 123, 124 GWB (To be submitted with the participation request by means of...”
Liste und kurze Beschreibung der Bedingungen
Supporting documents:
- 4. Self-declaration of suitability pursuant to Sections 123, 124 GWB (To be submitted with the participation request by means of self-declaration): Self-declaration of possessing the knowledge pursuant to Sections 123, 124 GWB is incorrect and that the cases mentioned therein do not apply - FAIR preprinted form
- 5. Company presentation (To be submitted with the participation request by means of self-declaration): "With the information asked for on the FAIR preprinted form, the number of employees over the previous three years - on the FAIR preprinted form under Company presentation"
Mehr anzeigen Wirtschaftliche und finanzielle Leistungsfähigkeit
Liste und kurze Beschreibung der Auswahlkriterien:
“Supporting documents:
- 6. Information on overall revenues and order-specific revenue (To be submitted with the participation request by means of...”
Liste und kurze Beschreibung der Auswahlkriterien
Supporting documents:
- 6. Information on overall revenues and order-specific revenue (To be submitted with the participation request by means of self-declaration): Declaration of the total company turnover and the turnover in relation to the particular type of service to which the award relates, in both cases, in relation to the last 3 financial years - on the FAIR preprinted form under Company presentation.
- 8.1 Proof of commercial liability insurance (To be submitted with the participation request by means of self-declaration): "Proof of a commercial liability insurance must be provided - preprinted FAIR form
Mehr anzeigen Technische und berufliche Fähigkeiten
Liste und kurze Beschreibung der Auswahlkriterien:
“Supporting documents:
- 9. Information about technical equipment, QM/QS, R&D (To be submitted with the participation request by means of self-declaration):...”
Liste und kurze Beschreibung der Auswahlkriterien
Supporting documents:
- 9. Information about technical equipment, QM/QS, R&D (To be submitted with the participation request by means of self-declaration): Information on technical equipment, QM/QA, R&D: Description of the technical equipment, the company's measures to ensure quality, and the company's investigation and research capabilities.
- 10. Description of reference projects (To be submitted with the participation request by means of self-declaration): Description of three comparable reference projects, including the project data asked for on the FAIR preprinted form.
Form References, with the following minimum requirements for the references:
At least 3 references from the last 10 years must be described in detail and shall proof the following experiences without doubt:
a) Experience in design and production of superconducting magnets, preferably with large gaps.
b) Experience in production and integration of magnet yokes, including precise assembly of laminated yokes.
c) Experience in production of pressure and vacuum vessels (design pres-sure above 20 bar / vacuum below 10-8 bar)
d) Experience in the production of cryogenic components and systems
e) Experience in the production of superconducting coils (winding, impregnation)
- 13. Certification according to DIN EN ISO 9001, EN ISO 5817 and (PED) 2014/68/EU (or comparable certification) (To be submitted with the participation request by means of third party confirmation): - Certification DIN EN ISO 9001 (or comparable certification)
- Certification (PED) 2014/68/EU pressure equipment directive (or comparable)
- Certification EN ISO 5817 welding norm (or comparable)
Mehr anzeigen Bedingungen für den Vertrag
Bedingungen für die Vertragserfüllung:
“Supporting documents:
- 1. Act Regulating a General Minimum Wage (MiLoG) (To be submitted with the participation request by means of self-declaration):...”
Bedingungen für die Vertragserfüllung
Supporting documents:
- 1. Act Regulating a General Minimum Wage (MiLoG) (To be submitted with the participation request by means of self-declaration): Declaration as per Section 19 (3) MiLoG - FAIR preprinted form
- 2. Proofs for subcontractors (To be submitted with the participation request by means of self-declaration): "The name and address of each intended subcontractor must be given when submitting the tender.
Each subcontractor used must meet the same suitability criteria as the primary contractor. Suitable proof for each subcontractor must be submitted.
The subcontractor must also submit
- A declaration of availability (see Declaration of availability preprinted form) together with the request to participate/tender. - FAIR preprinted form"
- 3. Participation - General declaration within the meaning of Section 126b (German Civil Code -BGB) (To be submitted with the participation request by means of self-declaration): General declaration of the person making the declaration within the meaning of Section 126b BGB. If the person making the declaration is not named in the request to participate, the request to participate will be deemed to have not been submitted.
- 14. Russia sanctions - Declaration on Regulation (EU) 833/2014 (To be submitted with the participation request by means of self-declaration): On 08.04.2022, the Council of the European Union adopted Regulation (EU) 2022/576 amending Regulation (EU) No 833/2014 concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine. This entered into force on 09.04.2022. As a regulation, it has direct legal effect in the member states and has a direct impact on the award of public contracts and concessions.
Verfahren Art des Verfahrens
Wettbewerbliches Verfahren mit Verhandlung
Informationen über die Reduzierung der Anzahl von Lösungen oder Angeboten während der Verhandlungen oder des Dialogs
Rückgriff auf ein gestaffeltes Verfahren, um die Zahl der zu erörternden Lösungen oder zu verhandelnden Angebote schrittweise zu verringern
Administrative Informationen
Frist für den Eingang von Angeboten oder Teilnahmeanträgen: 2023-02-22
12:00 📅
Voraussichtliches Datum der Versendung der Aufforderungen zur Angebotsabgabe oder zur Teilnahme an die ausgewählten Bewerber: 2023-03-02 📅
Sprachen, in denen Angebote oder Teilnahmeanträge eingereicht werden können: Englisch 🗣️
Ergänzende Informationen Informationen über elektronische Arbeitsabläufe
Die elektronische Bestellung wird verwendet
Die elektronische Rechnungsstellung wird akzeptiert
Zusätzliche Informationen
“The evaluation is based on the price-quotient method. Price and performance are assigned the weighting factors:
Award Criteria Weighting
Total Bid Offer:...”
The evaluation is based on the price-quotient method. Price and performance are assigned the weighting factors:
Award Criteria Weighting
Total Bid Offer: 35%
Performance Criteria: 65%
Performance Criteria,specified:
Technical Concept: 50%
Expediency: 20%
Detailed schedule: 30%
The offers are evaluated in relation to each other.
The detailed description of the basis how the concepts will be evaluated is shown within the document: "Conditions of application"
FAIR reserves the right to negotiate only with the three Bidders whose initial tenders have received the highest scores in the preliminary evaluation.
Bekanntmachungs-ID: CXS0YYEYWVSJ6HRQ
Mehr anzeigen Körper überprüfen
Name: Vergabekammer des Bundes
Postanschrift: Villemomblerstr. 76
Postort: Bonn
Postleitzahl: 53123
Land: Deutschland 🇩🇪 Verfahren zur Überprüfung
Genaue Informationen über Fristen für Überprüfungsverfahren:
“The applicants are made aware of the legal meaning of § 160, para. 3 of the German Act Against Restraints of Competition, particularly its no. 4.§ 160...”
Genaue Informationen über Fristen für Überprüfungsverfahren
The applicants are made aware of the legal meaning of § 160, para. 3 of the German Act Against Restraints of Competition, particularly its no. 4.§ 160 Introduction, Application
(1) The public procurement tribunal shall initiate review procedures only upon application.
(2) Every undertaking which has an interest in the contract and claims that its rights under § 97 para. 7 were violated by non-compliance with the provisions governing the awarding of public contracts has the right to file an application. In doing so, it must be shown that the undertaking has suffered a loss, or may be about to suffer a loss, in consequence of the alleged violation of provisions governing the awarding of public contracts.
(3) The application is inadmissible, if
1. the applicant became aware of the violation of provisions governing the awarding of public contracts during the award procedure and did not object to the contracting entity without undue delay.
2. violations of provisions governing the awarding of public contracts which become apparent from the tender notice are not notified to the contracting entity by the end of the period specified in the notice for the submission of a tender or application.
3. violations of provisions governing the awarding of public contracts which only become apparent from the award documents are not notified to the contracting entity by the end of the period specified in the notice for the submission of a tender or application.
4. more than 15 calendar days have expired since receipt of notification from the contracting entity that it is unwilling to redress the complaint. Sentence 1 shall not apply to an application under § 101b (1) no. 2 to have the award contract declared ineffective. § 101a para. 1 sentence 2 shall remain unaffected.
Mehr anzeigen
Quelle: OJS 2023/S 018-051017 (2023-01-20)