Gemeinsames Vokabular für öffentliche Aufträge (CPV): 42992000, 44610000, 51540000, 31630000, 31640000, 33158100, 51100000. Elektrogeräte für besondere Zwecke. Tanks, Sammelbehälter, Container und Druckbehälter. Installation von Maschinen und Geräten für besondere Zwecke. Magnete. Maschinen, Apparate und Geräte mit eigener Funktion. Elektromagnetische Anlage. Installation von elektrischen und mechanischen Einrichtungen.
Deadline
Die Frist für den Eingang der Angebote war 2009-11-26.
Die Ausschreibung wurde veröffentlicht am 2009-11-14.
Auftragsbekanntmachung (2009-11-09) Objekt Umfang der Beschaffung
Titel: Elektrogeräte für besondere Zwecke
Volltext:
“Gemeinsames Vokabular für öffentliche Aufträge (CPV): 42992000, 44610000, 51540000, 31630000, 31640000, 33158100, 51100000. Elektrogeräte für besondere...”
Volltext
Gemeinsames Vokabular für öffentliche Aufträge (CPV): 42992000, 44610000, 51540000, 31630000, 31640000, 33158100, 51100000. Elektrogeräte für besondere Zwecke. Tanks, Sammelbehälter, Container und Druckbehälter. Installation von Maschinen und Geräten für besondere Zwecke. Magnete. Maschinen, Apparate und Geräte mit eigener Funktion. Elektromagnetische Anlage. Installation von elektrischen und mechanischen Einrichtungen.
Mehr anzeigen Ort der Leistung Berlin🏙️ Metadaten der Bekanntmachung
Dokumenttyp: Auftragsbekanntmachung
Art des Auftrags: Lieferauftrag
Verordnung: Europäische Gemeinschaften
Originalsprache: Englisch 🗣️
Originaltext: CONTRACT NOTICE Supplies SECTION I: CONTRACTING AUTHORITY I.1) NAME, ADDRESSES AND CONTACT POINT(S): Helmholtz- Zentrum Berlin für Materialien und Energie GmbH, Hahn- Meitner- Platz 1, Contact: Abt.: A-EM, Attn: Martina Hörnig, D-14109 Berlin. Tel. +49 308062-2227. Fax +49 308062-3086. Internet address(es): General address of the contracting authority: www.helmholtz-berlin.de. Further information can be obtained at: As in above-mentioned contact point(s). Specifications and additional documents (including documents for competitive dialogue and a dynamic purchasing system) can be obtained at: As in above-mentioned contact point(s). Tenders or requests to participate must be sent to: As in above-mentioned contact point(s). I.2) TYPE OF THE CONTRACTING AUTHORITY AND MAIN ACTIVITY OR ACTIVITIES: Body governed by public law. Other: research. The contracting authority is purchasing on behalf of other contracting authorities: no. SECTION II: OBJECT OF THE CONTRACT II.1) DESCRIPTION II.1.1) Title attributed to the contract by the contracting authority: HZB Magnet System. II.1.2) Type of contract and location of works, place of delivery or of performance: Supplies. Purchase. Main place of delivery: Berlin. NUTS code: DE300. II.1.3) The notice involves: A public contract. II.1.5) Short description of the contract or purchase(s): The Helmholtz-Zentrum Berlin (HZB) will install a Series Connected Hybrid (SCH) magnet for performing neutron scattering experiments in high magnetic fields. The basic design of the SCH magnet has been performed by the National High Magnetic Field Laboratory (NHMFL), Tallahassee, USA under a research agreement with HZB. A SCH magnet consists of a concentric superconducting outer magnet (outsert coil) within a cryostat (vacuum container and radiation shields), connected electrically in series with a water-cooled inner magnet (insert coil). The magnet will be able to run without the resistive coil in superconducting magnet only (SMO) mode. The cryostat, the winding of the superconducting magnet on the basis of Nb3Sn cable-in-conduit-conductor (CICC) and the integration of the CICC- coil into the cryostat are subject of the call for tender. The scope of the call for tender is divided into three lots: LOT 1: The fabrication of the cryostat. LOT 2: The fabrication of the Nb3Sn CICC coil. LOT 3: The assembly of the Nb3Sn CICC coil into the cryostat. The water-cooled inner magnet and its integration is not part of this call for tender. The contracts of lot 1, lot 2 and lot 3 are expected to be completed when the magnet has passed the acceptance test in SMO mode proving that all components for lot 1 and lot 2 and their assembly (lot 3) work properly. The Vendor can tender for one or more lots. HZB prefers to minimize interface management and therefore encourages the Vendor to tender for more than one lot. Vendors bidding for lot 3 should also bid at least on lot 1 or lot 2. II.1.6) Common procurement vocabulary (CPV): 42992000, 31630000, 44610000. II.1.7) Contract covered by the Government Procurement Agreement (GPA): No. II.1.8) Division into lots: Yes. Tenders should be submitted for: one or more lots. II.1.9) Variants will be accepted: Yes. II.2) QUANTITY OR SCOPE OF THE CONTRACT II.2.1) Total quantity or scope: 1 item. II.3) DURATION OF THE CONTRACT OR TIME-LIMIT FOR COMPLETION: Duration in months: 24 (from the award of the contract). INFORMATION ABOUT LOTS LOT NO 1 TITLE: The fabrication of the cryostat 1) SHORT DESCRIPTION: The main components of the cryostat include vacuum vessel, 50K thermal shields, 4 K bore tube and RT to 4K links. A thermal shield cooled with helium gas and MLI (multi-layer-insulation) are installed between the magnet and the cryostat walls to reduce heat radiation losses. In the space between the insert coil and the outsert coil are RT bore, 50 K shield and 4 K bore tube. 2) COMMON PROCUREMENT VOCABULARY (CPV): 44610000. 3) QUANTITY OR SCOPE: 1 item. LOT NO 2 TITLE: The fabrication of the Nb3Sn CICC coil 1) SHORT DESCRIPTION: The CICC coil winding pack has an inner diameter of 0,6 m, an outer diameter of 1,2 m, a height of 0,8 m and contributes 13 T to the central field using three grades of CICC. Each conductor grade carries 20 kA and employs the same type of Nb3Sn superconducting wire, but each grade contains different quantities of superconducting wires different cabling patterns and different aspect ratios. To apply pre-compression the coil has to be assembled in a magnet frame with two endplates and tie rods. 2) COMMON PROCUREMENT VOCABULARY (CPV): 42992000, 31630000, 31640000, 33158100. 3) QUANTITY OR SCOPE: 1 item. LOT NO 3 TITLE: The assembly of the Nb3Sn CICC coil into the cryostat 2) COMMON PROCUREMENT VOCABULARY (CPV): 51540000, 51100000. 3) QUANTITY OR SCOPE: 1 item. SECTION III: LEGAL, ECONOMIC, FINANCIAL AND TECHNICAL INFORMATION III.1) CONDITIONS RELATING TO THE CONTRACT III.1.1) Deposits and guarantees required: Letter of Credit for the Prepayment and Warranty must be unlimited in time and free of charge for the Contractor, drawn from a German credit institution. III.1.2) Main financing conditions and payment arrangements and/or reference to the relevant provisions regulating them: Prepayments and partial-payments are possible. Retentions for security and warranty max. 10 %. III.1.4) Other particular conditions to which the performance of the contract is subject: No. III.2) CONDITIONS FOR PARTICIPATION III.2.1) Personal situation of economic operators, including requirements relating to enrolment on professional or trade registers: Information and formalities necessary for evaluating if requirements are met: With request to participate. Certificate of company registration or comparable. Tax clearance certificate or comparable. III.2.2) Economic and financial capacity: Information and formalities necessary for evaluating if requirements are met: With request to participate: — a declaration of the company’s total transaction volume and the transaction volume in the specific field represented by the procurement description, both for the last three accounting years, — number of employes. III.2.3) Technical capacity: Information and formalities necessary for evaluating if requirements are met: With request to participate: — number of employes in the specific field, — References of comparable projects: For each reference please include company name, contact person, telephone number and e-mail address. — Describe your internal practices for quality-management, with specific mention of the following points: — Controlling receipt of goods. — Insuring that quality standards are met by subcontractors. — Number of and process for final product controls. — Example of a quality assurance plan for the complete project development of a comparable project. — Confirmation assuring that all employees involved in the process are fluent enough in English and/or German to carry out their role. III.2.4) Reserved contracts: No. SECTION IV: PROCEDURE IV.1) TYPE OF PROCEDURE IV.1.1) Type of procedure: Negotiated. Candidates have already been selected: no. IV.1.2) Limitations on the number of operators who will be invited to tender or to participate: Envisaged minimum number: 1. Maximum number: 10. IV.1.3) Reduction of the number of operators during the negotiation or dialogue: Recourse to staged procedure to gradually reduce the number of solutions to be discussed or tenders to be negotiated yes. IV.2) AWARD CRITERIA IV.2.1) Award criteria: The most economically advantageous tender in terms of the criteria stated below: 1. Price. Weighting: 40. 2. Technical evaluation/equipment features. Weighting: 40. 3. Project and quality management, documentation. Weighting: 20. IV.2.2) An electronic auction will be used: No. IV.3) ADMINISTRATIVE INFORMATION IV.3.1) File reference number attributed by the contracting authority: HZB 21/2009/Hg. IV.3.2) Previous publication(s) concerning the same contract: No. IV.3.3) Conditions for obtaining specifications and additional documents or descriptive document: Payable documents: no. IV.3.4) Time-limit for receipt of tenders or requests to participate: 26.11.2009. IV.3.5) Date of dispatch of invitations to tender or to participate to selected candidates: 7.12.2009. IV.3.6) Language(s) in which tenders or requests to participate may be drawn up: German. English. SECTION VI: COMPLEMENTARY INFORMATION VI.1) THIS IS A RECURRENT PROCUREMENT: No. VI.2) CONTRACT RELATED TO A PROJECT AND/OR PROGRAMME FINANCED BY EU FUNDS: No. VI.3) ADDITIONAL INFORMATION: Deadline for submitting the bidding documents: 28.1.2010. VI.4) PROCEDURES FOR APPEAL VI.4.1) Body responsible for appeal procedures: Bundeskartellamt, Kaiser-Friedrich-Str. 16, D-53113 Bonn. E-mail: info@bundeskartellamt.bund.de. Tel. +49 2289499-0. URL: www.bundeskartellamt.de. Fax +49 2289499-400. VI.4.3) Service from which information about the lodging of appeals may be obtained: see point VI.4.1. VI.5) DATE OF DISPATCH OF THIS NOTICE: 9.11.2009.
Verfahren
Verfahrensart: Verhandlungsverfahren
Vergabekriterien
Wirtschaftlichstes Angebot
Angebotsart: Gesamt- oder Teilangebot
Art des öffentlichen Auftraggebers: Einrichtung des öffentlichen Rechts
Haupttätigkeit: Sonstiges
Öffentlicher Auftraggeber Identität
Name des öffentlichen Auftraggebers: Helmholtz- Zentrum Berlin für Materialien und Energie GmbH
Land: Deutschland 🇩🇪 Kontakt
Internetadresse: www.helmholtz-berlin.de🌏